Albums
Material Selections
Alumina
Zirconia Toughened Alumina
Zirconia Toughened Alumina
It is Al2O3 slurry as the feedstock material for the 3dcelain printer which the printed and sintered part has a flexural strength of 400Mpa.
Zirconia Toughened Alumina
Zirconia Toughened Alumina
Zirconia Toughened Alumina
It is zirconia grains in the alumina matrix of the slurry as the feedstock material for the 3dcelain printer.
Zirconia
Zirconia Toughened Alumina
Color Alumina
It is ZrO2 slurry as the feedstock material for the 3dcelain printer which the printed and sintered part has a flexural strength of 800Mpa.
Color Alumina
Yttria stabilized zirconia
Color Alumina
Cr added Al2O3 slurry as the feedstock material for the 3dcelain printer which can not only come out with good strength but also the color turn white to red.
Work together
Yttria stabilized zirconia
Yttria stabilized zirconia
If you need any special ceramic material to be printed, we are welling to collebrate with and to bring the best results of the feedstock material for the 3dcelain printer.
Yttria stabilized zirconia
Yttria stabilized zirconia
Yttria stabilized zirconia
From 0Y to 5Y zirconia slurry can be ordered to bring different translucent requirements.
Copyright © 2022 3D Porcelain Technology — technologies from 3DT Lab, Taipei Tech.